{"id":352,"date":"2013-05-14T08:55:59","date_gmt":"2013-05-14T08:55:59","guid":{"rendered":"http:\/\/www.phase57.com\/?page_id=352"},"modified":"2021-02-28T12:30:22","modified_gmt":"2021-02-28T11:30:22","slug":"mobo-making-progress","status":"publish","type":"page","link":"https:\/\/192.168.1.59\/build\/ambika\/mobo-making-progress\/","title":{"rendered":"mobo, making progress"},"content":{"rendered":"
Making good progress on the motherboard .. it\u2019s a lot of fun anyway ! And now that I have the LCD and SD connector I\u2019ll prolly finish it today. I still can\u2019t make up my mind though, about how to mount the LCD. Just solder it with the header, or use a ribbon cable if that\u2019s possible, or maybe just use separate wires that I can cut later. It\u2019s just that I plan to design a case for it and feel that once the LCD is soldered I can\u2019t really play with the height and or angle of the screen anymore. De-soldering will prolly be hell if I use the header.<\/p>\r\n
<\/a><\/p>\r\n The more expensive parts are being soldered on, can\u2019t mess up now \u2026<\/p>\r\n <\/a><\/p>\r\n <\/a><\/p>\r\n This sd card connector was actually the hardest part to solder, since it\u2019s an SMD part, it\u2019s all a bit fiddly. Could have used a finer soldering tip for this one.<\/p>\r\n